SUPERGUARD PU 555
SUPERGUARD PU 555
PRODUCT DESCRIPTION :
A fast drying two pack and colour aliphatic hardener non yellowing which has excellent flow smoothness, and exhibit high durable abrasion and heat resistant finish. It also stain resistant and weather resistance.
RECOMMENDED USE :
Superguard PU is a topcoat or finish over property primed surfaces for protective application for steel , tank exterior , concrete floor , chemical plant , refineries etc .
PHYSICAL DATA :
Colour According to colour card
Volume Solid (%) 50 ± 2 ( ASTM D2697 Modified )
Specific gravity 1.16±0.05 Drying time @ 25 deg C
Gloss Semi-gloss , glossy Dry to touch 35-40 minutes
Surface Steel and Concrete Dry to hard 10-12 hours
Flash point 30 deg C
Flim thickness recommended 40-50 microns [ D.F.T. ]
Theoretical coverage 12.50-10.00 sq.m./litre.
APPLICATION DATA :
Application method Airless or conventional spray
Temperature Minimum 10 °C
Humidity Maximum 85 % R.H.
Mixing ratio 7 part of part A , 1 part of part B by volume
Potlife 10-12 hours @ 25 deg C
Thinning Thinner 4K No. 920 5-10 % by volume
Cleaner Thinner 4K No. 920
SURFACE PREPARATION :
Surface must be clean , Remove all dirt , grease and other foreign matter
by cleaner and sandblasting , or mechanical abrasion . Remove water and dust from the surfaces.
RECOMMENDED SYSTEM :
Steel Concrete flooring
Superguard Zinc – H Grey Superguard sealer
Superguard HB Superguard EM
Superguard PU 555 Superguard PU 555
STORAGE AND HANDLING :
The product must be store in well ventilated place protected from
high temperature. Container must be kept tightly closed .
Handling Handle with care . Stir well before use .
Packing Two pack product per set ; 1 U.S. Gallon, 5 U.S. Gallon.
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear . Wear suitable protective clothing such as overalls during painting.
Avoid skin contact . Spillage on skin should immediately be remove with soap and water.
Eyes should be flushed with water and medical attention sought immediately.