Description
APPLICATION DATA :
Application method Brush, Roller and Airless spray
Temperature Minimum 5 – 43 °C
Humidity Maximum 85 % R.H.
Curing Mechanism Solvent loss and heat cure
Pot life 10 – 12 hours @ 25 deg C
Thinner/Cleaner Thinner 4K No. 65
SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean
RECOMMENDED SYSTEM :
Superguard HR 999 is able to be applied as a self primer on steel, and also be applied over most Superguard product
STORAGE AND HANDLING :
Storage The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling Handle with care. Stir well be for use.
Packing 1 USGL and 5 USGL
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.