Description
APPLICATION DATA :
Application method Brush, Roller and Airless spray
Temperature Minimum 10 – 49 °C
Humidity Maximum 85 % R.H.
Mixing ratio Base : Hardener = 80 : 20 by volume
Thinning 5-10 % by volume
Pot life 3 hours @ 25 deg C ( Reduced at higher temperatures )
Thinner/Cleaner Thinner 4K No.65
SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard
Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove contaminated, oil and grease must be clean.
RECOMMENDED SYSTEM :
I. Superguard sealer II. Superguard FX colour
Superguard FX colour Superguard FX colour
(concrete) ( Steel )
STORAGE AND HANDLING :
Storage The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling Handle with care. Stir well be for use.
Packing Base: 3.028 litres. , Hardener: 0.757 litres.
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.