Description

APPLICATION DATA :

Application method        Brush, Roller and Airless spray
Temperature        Minimum 10 °C

Humidity              Maximum 85 % R.H.

Mixing ratio  4 part of part A to be mixed thoroughly with 1 part of part B (4:1) by volume
Pot life               3 hours @ 25 deg

Thinning           Thinner 4K No 65 5-10 % by volume

Cleaner            Thinner 4K No. 65

SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard

Sa. 2.0 ” Commercial Blast” or better before applying over primer and when cured completely, remove any oil and grease residue by cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :
I.Metal surface                                                  II. Masonry sealer

Superguard colour                                            Superguard sealer
Superguard colour                                            Superguard HB
.                                                                             Superguard colour

STORAGE AND HANDLING :

Storage        The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling        Handle with care. Stir well before use.
Packing        Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.

HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.