Description
APPLICATION DATA :
Application method Brush, Roller, and Airless spray
Temperature Minimum 10 °C
Humidity Maximum 85 % R.H.
Mixing ratio 4 part of part A to be mixed thoroughly with 1 part of part B ( 4: 1) by volume.
Thinning 5-10 % by volume
Pot life 3 hours @ 25 deg C ( Reduced at a higher temperature )
Thinning Thinner 4K No.65 5-10 % by volume
Cleaner Thinner 4K No.65
SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” or better before applying over primer and when cured completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean
RECOMMENDED SYSTEM
Super guard coal tar GL 2 coats
STORAGE AND HANDLING :
Storage The product must be store in a well-ventilated place protected from high
Handling Handle with care. Stir well before use.
Packing Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.