Polyurethane 580 Sealer

Polyurethane 580 Sealer

PRODUCT DESCRIPTION :
A high solid two-pack polyurethane sealer finishes with fast drying and free – sanding time and exhibits excellent HOLD-UP properties.
RECOMMENDED USE :
Polyurethane 580 sealers used as an economical and good quality coating. Polyurethane 580 sealer is an ideal finishing coating for woodworking, timber cabinets interior woodwork, etc.
PHYSICAL DATA :
Finish      Flat
No. of component      2
Colour      Clear, All color
Surface      Wood
Volume solid      20-25 % (Mixed)
Specific gravity ( 25 °C )      1.00-1.05
Viscosity ( 25 oC )      12 – 15 sec. (Mixed)
Flashpoint      20 + 2 oC

SKU: 66 Category:

Description

APPLICATION DATA :
Application      Air- spray, airless – spray
Recommended      topcoat Polyurethane 550 clear gloss
Surface preparation      Surface to be painted must be thoroughly cleaned and free from and traces of oil & grease. loose woodgrain shall be patch up with an approved
wood putty.
Approximated coverage area      5 – 7 Sq.M / Kg.
Thinner 4K      No. 5006,5004
Cleaner           Thinner 4K No. 17
Pot life ( 30 oC )      6 – 8 HRS.
Mixing ratio      3: 1 : 3 ( A: B: Thinner by weight )
Drying time ( 30 oC )      To touch 10 – 15 minutes
To recoat 40 – 50 minutes
To sanding 40 – 50 minutes
Drying time is dependent on thickness apply temperature and humidity.
STORAGE AND HANDLING :
Storage      The product must be store in a well-ventilated place protected from high temperature. The container must be kept tightly closed.
Handling     Handle with care. Stir well before use.
Packing     Part A = 15 kgs.
Part B = 2 X 2.5 kgs.
HEALTH AND SAFETY :
Avoid contact with skin and eyewear. Wear suitable protective clothing such as overalls during painting. Avoid skin contact. Spillage on the skin should immediately be removed with soap and water. Eyes should be flushed with water and medical attention sought immediately.