LACQUER 400 SEALER

LACQUER 400 SEALER

PRODUCT DESCRIPTION :
LACQUER 400 SEALER IS A HIGH-QUALITY NITROCELLULOSE RESIN SOLVENT BASED FINISHING.
LACQUER 400 SEALER IS A FAST DRY AND GOOD ADHESION PROPERTIES.
RECOMMENDED USE :
LACQUER 400 SEALER IS USED AS AN ECONOMICAL AND GOOD QUALITY COATING.
LACQUER 400 SEALER IS COATING FOR WOODWORKING, TIMBER CABINETS ETC.
PHYSICAL DATA :
FINISH      FLAT

NO. OF COMPONENT       1
COLOUR CLEAR,       ALL COLOURS
SURFACE      WOOD
VOLUME SOLID       25 – 30 %
SPECIFIC GRAVITY ( 25 oC )       1.00 + 0.05
VISCOSITY ( 25 oC )        15 – 17 sec (MIXED 1 :1 )
FLASH POINT      20 + 2 oC

SKU: 59 Category:

Description

APPLICATION DATA :
APPLICATION
AIR – SPRAY, AIRLESS – SPRAY, BRUSHING
RECOMMENDED     TOPCOAT LAQUER 400 CLEAR GLOSS , LAQUER 400 COLOUR GLOSS
SURFACE PREPARATION
SURFACE TO BE PAINTED MUST BE THOROUGHLY CLEANED AND
FREE FROM AND TRACES OF OIL & GREASE. LOOSE WOODGRAIN
SHALL BE PATCH UP WITH AN APPROVED WOOD PUTTY
FILM THICKNESS PER COAT      WET 75 – 100 MICRONS
APPROXIMATED COVERAGE AREA      6 – 8 Sq.M / KG.
THINNER      THINNER 4K NO. 4001, NO. 3
CLEANER      THINNER 4K NO. 17
THINNER MIX.      1: 1 PART BY WEIGHT
DRYING TIME ( 30 oC )       TO TOUCH 5 – 10 MINUTES
TO RECOAT   20 – 30 MINUTES
TO SANDING  40 – 50 MINUTES
DRYING TIME ARE DEPENDENT ON THICKNESS APPLY, TEMPERATURE AND HUMIDITY
STORAGE AND HANDLING :
STORAGE
THE PRODUCT MUST BE STORE IN WELL VENTILATED PLACE PROTECTED
FROM HIGH TEMPERATURE. CONTAINER MUST BE KEPT TIGHTLY CLOSED.
HANDING      HANDLE WITH CARE. STIR WELL BEFORE USE.
PACKING      170 kgs , 18 kgs
HEALTH AND SAFETY :
AVOID CONTACT WITH SKIN AND EYES. WEAR SUITABLE PROTECTIVE CLOTHING SUCH AS OVERALLS DURING PAINTING. KEEP CONTAINER CLOSED WHEN NOT IS USE. IN CASE SPILLAGE ON SKIN SHOULD IMMEDIATELY BE REMOVED WITH SUITABLE CLEANER, SOAP, AND WATER. IF SPILLAGE
IN EYES SHOULD BE WELL FLUSHED WITH WATER AND HOSPITAL ATTENTION IMMEDIATELY.