DYE STAIN 100

DYE STAIN 100

Technical Data

PRODUCT DESCRIPTION :
A concentrated penetrating dye-based stain designed specifically by hand giving excellent results and having
resistance to fading and grain raising.

RECOMMENDED USE :
Dye stain 100 exhibits very good compatibility with many of the transparent coating for use on interior timber, furniture, etc.

PHYSICAL DATA :
Finish Colour solution

No. of component      1
Colour        Range of timber and special desired
Surface      Wood
Flashpoint       20 + 2 °C

SKU: 56 Category:

Description

APPLICATION DATA :
Application Stir thoroughly and apply in clear product applied by mixing up 10% by
weight (the shade intensity would depend upon percentage) in polyurethane lacquer, acid curing.
Surface preparation Surface to be painted must be thoroughly cleaned and free from and traces of oil & grease. Loose wood grain shall be patch up with approved wood putty.
Thinner    Not thinning required. If lighter tones are required, it may thin for
dilute by thinner 4K No.1001
Cleaner      Thinner 4K No.17

STORAGE AND HANDLING :
Storage      The product must be store in a well-ventilated place protected from high
temperature.      The container must be kept tightly closed.
Handling      Handle with care. Stir well be for use.
Packing      17 kgs.

HEALTH AND SAFETY :
Avoid contact with skin and eyewear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water. Eyes should be flushed with water and medical attention sought immediately.