SUPERGUARD PU 777

SUPERGUARD PU 777

SUPERGUARD PU 777

PRODUCT DESCRIPTION :

A fast-drying two-pack and colour aliphatic hardener non-yellowing which has excellent flow smoothness, and exhibit high durable abrasion and heat resistant finish. It also stain-resistant and weather resistance.
RECOMMENDED USE :

Superguard PU is a topcoat or finishes over property primed surfaces for protective application for steel, tank exterior, concrete floor, chemical plant, refineries etc.
PHYSICAL DATA :
Colour        According to colour card
Volume Solid (%)        50 ± 2 ( ASTM D2697 Modified )

Specific gravity        1.16±0.05
Gloss        Semi-gloss, glossy
Surface        Steel and Concrete
Flashpoint        30 deg C
Flim thickness recommended        40-50 microns [ D.F.T. ]
Theoretical coverage        12.50-10.00 sq.m./litre.
Drying time      @ 25 deg C
Dry to touch        35-40 minutes
Dry to hard          10-12 hours

SKU: 29 Category:

Description

APPLICATION DATA :
Application method        Airless or conventional spray
Temperature Minimum      10 °C

Humidity Maximum        85 % R.H.
Mixing ratio        7 part of part A, 1 part of part B by volume
Pot life        10-12 hours @ 25 deg C
Thinning        Thinner 4K No. 920 5-10 % by volume
Cleaner        Thinner 4K No. 920
SURFACE PREPARATION :
The surface must be clean, Remove all dirt, grease and other foreign matter
by cleaner and sandblasting, or mechanical abrasion. Remove water and dust from the surfaces.
RECOMMENDED SYSTEM :
I. Steel               II. Concrete flooring
Superguard Zinc – H             Grey Superguard sealer
Superguard HB                     Superguard EM
Superguard PU 777              Superguard PU 777

STORAGE AND HANDLING :

Storage    The product must be store in a well-ventilated place protected from
high temperature. The container must be kept tightly closed.
Handling        Handle with care. Stir well before use.
Packing           Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.