SUPERGUARE HR 999

SUPERGUARE HR 999

SUPERGUARD HR 999

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard HR 999 is a single component of 100 % silicone aluminium coating high-performance, high-temperature resistance coating. Can be used as a self-priming coating system over the abrasive blast. May also be applied over Superguard product.

RECOMMENDED USE :

A 100 % silicone aluminium coating for high-temperature resistance applied for exteriors of steel structure exposed to high temperatures, such as stacks. Pipes, etc. in chemical plants, marine structures, ship, power plants.

PHYSICAL DATA :
Colour       Aluminium
Temperature Resistance       550 – 650
Volume Solid(%)       35 + 2 ( ASTM D2697 Modified )

Drying time @ 25 deg C
Dry to touch       30 – 45 minutes
Cured to hard      2 hours
-Recommended film thickness
-Good Ventilation
-Dependent on temperature and humidity
Specific gravity       1.18 – 1.20
Gloss       Semi-Gloss
Surface       Steel

Flash point (TCC ASTM D56)       30 + 2 deg
Flim thickness per coat       25 microns

Theoretical coverage       12.5 sq. m / litre at 25 microns

 

SKU: 31 Category:

Description

APPLICATION DATA :
Application method       Brush, Roller and Airless spray
Temperature Minimum       5 – 43 °C

Humidity Maximum        85 % R.H.
Curing Mechanism       Solvent loss and heat cure
Pot life       10 – 12 hours @ 25 deg C
Thinner/Cleaner       Thinner 4K No. 65

SURFACE PREPARATION :

Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue by cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :

Superguard HR 999 is able to be applied as a self primer on steel, and also be applied over most Superguard product

STORAGE AND HANDLING :

Storage The product must be store in a well-ventilated place protected from high

temperature. The container must be kept tightly closed.

Handling Handle with care. Stir well be for use.

Packing       1 USGL and 5 USGL

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.