Superguard Zinc Rich

Superguard Zinc Rich

SUPERGUARD ZINC RICH
TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard zinc rich is a two-component epoxy coating. The formulated with zinc powder.

The zinc content of the coating gives steel protection if the film is damaged.

RECOMMENDED USE :

Superguard zinc rich is used as a primer for structural steel. It may be used to repair itself or inorganic zinc primer.

PHYSICAL DATA :

Colour:        Grey
Volume Solid (%):        58 ± 2 ( ASTM D2697 Modified )

Surface        Steel 

Component        2 

Dry film thickness per coat         50-75 microns [ D.F.T.] 

Theoretical coverage        9.67-7.73 sq. m. / litre.
Drying time           @ 25 deg C
Dry to touch           30 mins.
Dry through           45 mins.

 

SKU: 25 Category:

Description

APPLICATION DATA :
Application method      Airless or conventional spray

Temperature        Minimum 10 ๐C
Humidity Maximum         85% R.H.
Mixing ratio        4 part of part A to be mixed thoroughly with 1 part of part B by volume.
Pot life           20 hours at 25 deg C
Thinning        Thinner 4K No. 65 5-10 % by volume

Cleaner           Thinner 4K No. 65

SURFACE PREPARATION :

Dry abrasive blast clean steel surface to comply with Swedish Standard Sa 2.0 “Commercial Blast” or powder tool cleaning before applying.

RECOMMENDED SYSTEM :

Superguard zinc rich

Superguard HB

Superguard PU 777

STORAGE AND HANDLING :

Storage   The product must be store in a well-ventilated place protected from high
Handling    Handle with care. Stir well before use.

Packing Two-pack product per set; 1 U.S. Gallon.

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.