Superguard IZ

Superguard IZ

SUPERGUARD – IZ

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguare-IZ is fast drying properties permit quick handling and fast top coating meets or exceeds requirements of Steel Structures Painting Council Specification PS 12.00 for inorganic zinc coating

RECOMMENDED USE :

Superguard-IZ is designed for use as a fast-drying shop primer for ship – fabricated steel, also suitable for general-purpose industrial maintenance priming in corrosive atmospheric exposures where inorganic zinc primers are normally recommended and top-coated with corrosion-resistant topcoats. Superguard-IZ may be top-coated with epoxies, vinyl, acrylics, chlorinated rubbers, or other topcoats when used in the industrial or marine maintenance system.
PHYSICAL DATA :
Colour      Grey
Volume Solid (%)       60 + 2 ( ASTM D2697 Modified )

Specific gravity      1.15-1.20
Surface      Steel
Flashpoint        Base:15 deg C
.                         Hardener: 25 deg C
Flim thickness per coat      100 – 150 microns [ D.F.T ]
Theoretical coverage       4.0-6.0 sq. m /Ltr.
Drying time        @ 25 deg C
Dry to touch      30 mins
Dry to recoat     4-5 hours
Cured to hard    2-7 days
-Recommended film thickness
-Good ventilation
-Dependent on temperature and humidity

QUALIFICATION :        ASTM D 4541 – 02 , ASTM G 154

 

SKU: 24 Category:

Description

APPLICATION DATA :
Application method     Brush, Roller, and Airless spray
Temperature Minimum        5 – 38 °C

Humidity Maximum             50 – 95 % R.H.
Mixing ratio           Base : Powder = 4 : 1 by volume
Thinning                  5-10 % by volume
Pot life                    5 hours @ 25 deg C ( Reduced at higher temperatures )
Thinner/Cleaner     Thinner 4K No.65
Thinner/Cleaner     Thinner 4K No.65

SURFACE PREPARATION :

Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue with cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :

Superguard-IZ          100 micron

STORAGE AND HANDLING :
Storage    The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling      Handle with care. Stir well be for use.
Packing        5 Liters

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.