Superguard HB Phenolic

Superguard HB Phenolic

SUPERGUARD HB PHENOLIC

PRODUCT DESCRIPTION :

Superguard HB Phenolic is a two-component, high build epoxy phenolic coating, It has excellent to continuous and alternating service for a wide range of chemicals, solvents, caustic, crude, and fuel oils, as well as, neutral, alkaline, and nonoxidizing salt solutions in water. It may be cleaned between cargoes with hot cleaning. Up to a Butterworth temperature of 80 °C
RECOMMENDED USE :

Provides excellent protection to prepared steel and concrete exposed to splash, spillage, and fumes of corrosive chemical and weather environments. It’s used as a tank lining for ship tanks, road tankers, barges, railroad cars, and storage tanks in the chemical and petrochemical industries.

O : VOC compliant O : Tank lining O : Economical potable water tank lining; requires only 2 coats

O : Withstands continuous immersion in water up to 60 °C

O : Recommended for use under insulation up to 177 °c

PHYSICAL DATA :

Colour       White, Ivory, pearl grey
Volume Solid (%)       65 ± 3 ( ASTM D2697 Modified )
Specific gravity       1.43±0.05

Gloss        flat

Surface        Steel and Concrete
Flash point (TCC ASTM D56)        Resin [ 39 °C ], cure [ 28 °C ]
Flim thickness per coat        100-150 microns [ D.F.T. ]
Theoretical coverage        6.50-6.30 sq. m / liter.
Drying time        @ 30 °C
Dry to touch        1-1½ hours
Dry to recoat        4-5 hours
Cured to hard        2-5 days

SKU: 26 Category:

Description

APPLICATION DATA:
Application method        Brush, Roller, and Airless spray

Temperature Minimum        10 ๐C
Humidity Maximum        85% R.H.
Mixing ratio
4 part of part A to be mixed thoroughly with 1 part of part B (1:1) by volume.
Pot life        2 hours @ 30 °C
Thinning        Thinner 4K No. 65 5-10 % by volume
Cleaner        Thinner 4K No. 65

SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard

Sa. 2.5 ” Near white ” or better before applying over primer and when cured
completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove
RECOMMENDED SYSTEM :

. I. Metal surface        II. Masonry surface

Superguard HB Phenolic        Superguard HB Phenolic

Superguard HB Phenolic        Superguard HB Phenolic

STORAGE AND HANDLING :
Storage
The product must be store in a well-ventilated place protected from high

temperature. The container must be kept tightly closed.

Handling        Handle with care. Stir well before use.
Packing        Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.

Technical Data