SUPERGUARD HB

SUPERGUARD HB

SUPERGUARD HB

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard HB is a two-component, high build epoxy coating with high resistance to a wide range of chemical and solvent. The formulated with inert fillers and pigments which provide good durability and protection in the marine and aggressive environment, a wide range of topcoat where improved gloss and colour retention.

RECOMMENDED USE :

Use as an intermediate or topcoat over zinc-rich or primer for the protection structural steel, tank exterior, chemical plants, concrete floor, platforms, refineries etc.
PHYSICAL DATA :

Colour                             According to colour card
Volume Solid (%)           90 ± 2        ( ASTM D2697 Modified )
Specific gravity              1.43±0.05

Gloss                Semi-Gloss
Surface            Steel and Concrete
Flashpoint (TCC ASTM D56)           20 deg C
Flim thickness per coat                   100-150 microns [ D.F.T. ]
Theoretical coverage                       9.00-6.00 sq. m / litre.
Drying time               @ 25 deg C
Dry to touch              2-3 hours
Dry to recoat             5-6 hours
Cured to hard            2-7 days

 

SKU: 15 Category:

Description

APPLICATION DATA :
Application method    Brush, Roller and Airless spray

Temperature Minimum           10 ๐C

Humidity Maximum                 85% R.H.
Mixing ratio 1 part of part A to be mixed thoroughly with 1 part of part B (1:1) by volume.
Pot life                                 3 hours @ 25 deg C
Thinning                              Thinner 4K No. 65 5-10 % by volume

Cleaner                                Thinner 4K No. 65

SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard

Sa. 2.0 ” Commercial Blast” or better before applying over primer and when cured
completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove

RECOMMENDED SYSTEM :
. I. Metal surface                        II. Masonry surface

Superguard HB                         Superguard Sealer
Superguard PU 777                  Superguard HB

STORAGE AND HANDLING :
Storage   The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.

Handling              Handle with care. Stir well before use.
Packing                Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.
HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.