SUPERGUARD FX COLOUR

SUPERGUARD FX COLOUR

SUPERGUARD FX COLOUR

PRODUCT DESCRIPTION :
TECHNICAL DATA:

Superguard FX colour is a two-component epoxy coating with high resistance to a wide range of chemical and solvent. This product designed to have a flexibility and hight adhesion, a wide range of topcoat where improved gloss and colour retention.

RECOMMENDED USE :

Use as an intermediate or topcoat over zinc-rich or primer for the protection structural steel, tank exterior, chemical plants

PHYSICAL DATA :
Colour                            According to colour card
Volume Solid (%)          70 + 2 (Base) ( ASTM D2697 Modified )

Specific gravity                1.28-1.32
Gloss                               Glossy
Surface                            Steel and Concrete
Flashpoint Base :            0 deg C Cured to hard 2-7 days

Hardener :                       25 + 2 deg C

Flim thickness per coat  100 – 150 microns [ D.F.T ]
Theoretical coverage      4.6 – 7 sq. m /Ltr.
Drying time            @ 25 deg C
Dry to touch            2-3 hours
Dry to recoat          5-6 hours
-Recommended film thickness
-Good ventilation
-Dependent on temperature and humidity

SKU: 14 Category:

Description

APPLICATION DATA :
Application method                Brush, Roller and Airless spray
Temperature                            Minimum 10 – 49 °C
Humidity                                  Maximum 85 % R.H.
Mixing ratio Base :                  Hardener = 80 : 20 by volume
Thinning                                   5-10 % by volume
Pot life                                      3 hours @ 25 deg C ( Reduced at higher temperatures )
Thinner/Cleaner                      Thinner 4K No.65
SURFACE PREPARATION :

Steel surface – abrasive blast clean surface to comply with Swedish Standard

Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue by cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminated, oil and grease must be clean.

RECOMMENDED SYSTEM :

I. Superguard sealer                                        II. Superguard FX colour

Superguard FX colour                                    Superguard FX colour

(concrete)                                                        ( Steel )

STORAGE AND HANDLING :

Storage   The product must be store in a well-ventilated place protected from high

temperature. The container must be kept tightly closed.

Handling                       Handle with care. Stir well be for use.

Packing Base:              3.028 litres. , Hardener: 0.757 litres.

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.