SUPERGUARD COLOUR

SUPERGUARD COLOUR

SUPERGUARD COLOUR

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard colour is a two-component, high build epoxy coating with high resistance to a wide range of chemical and solvent. The formulated with inert fillers and pigments which provide good durability and protection in the marine and aggressive environment, a wide range of topcoat where improved gloss and colour retention.

RECOMMENDED USE :

Use as an intermediate or topcoat over zinc-rich or primer for the protection structural steel, tank exterior, chemical plants, concrete floor, platforms, refineries etc.

PHYSICAL DATA :
Colour        According to colour card
Volume Solid (%)        60 ± 2 ( ASTM D2697 Modified )
Specific gravity        1.3 + 0.05
Gloss        matt
Surface        Steel and Concrete
Flashpoint (TCC ASTM D56)        20 + 2 deg C Cured to hard 2-7 days

Flim thickness per coat        60-75 microns (D.F.T.)
Theoretical coverage        10.00-8.00 sq. m. / litre.
Drying time           @ 25 deg C
Dry to touch          2-3 hours
Dry to recoat         5-6 hours

 

SKU: 11 Category:

Description

APPLICATION DATA :

Application method        Brush, Roller and Airless spray
Temperature        Minimum 10 °C

Humidity              Maximum 85 % R.H.

Mixing ratio  4 part of part A to be mixed thoroughly with 1 part of part B (4:1) by volume
Pot life               3 hours @ 25 deg

Thinning           Thinner 4K No 65 5-10 % by volume

Cleaner            Thinner 4K No. 65

SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard

Sa. 2.0 ” Commercial Blast” or better before applying over primer and when cured completely, remove any oil and grease residue by cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :
I.Metal surface                                                  II. Masonry sealer

Superguard colour                                            Superguard sealer
Superguard colour                                            Superguard HB
.                                                                             Superguard colour

STORAGE AND HANDLING :

Storage        The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling        Handle with care. Stir well before use.
Packing        Two-pack product per set; 1 U.S. Gallon, 5 U.S. Gallon.

HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.