SUPERGUARD 2K SUPER

SUPERGUARD 2K SUPER

SUPERGUARD 2K SUPER

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard 2K Super is a two-component, high build epoxy coating with high resistance to a wide range of chemical and solvent. The formulated with inert fillers and pigments which provide good durability and protection in the marine and aggressive environment, a wide range of topcoat where improved gloss and colour retention.

RECOMMENDED USE :

Use as a primer or topcoat for the protection structural steel, and exterior, chemical plants, galvanized steel stainless steel, concrete floor, platforms, refineries etc.

PHYSICAL DATA :
Colour            According to colour card
Volume Solid (%)              70 + 2 ( ASTM D2697 Modified )

Specific gravity             1.30 – 1.35

Gloss               Semi-gloss
Surface            Steel snd Concrete
Flashpoint (TCC ASTM D56)             20 + 2 deg C

Flim thickness per coat           100 – 150 microns [ D.F.T ]
Theoretical coverage                4.6 – 7 sq. m /Ltr.
Drying time               @ 25 deg C
Dry to touch              1-2 hours
Dry to recoat             3-4 hours
Cured to hard            2-7 days
-Recommended film thickness

-Dependent on temperature and humidity

 

SKU: 13 Category:

Description

APPLICATION DATA :
Application method                  Brush, Roller, and Airless spray
Temperature Minimum             5 – 43 °C

Humidity                   Maximum 85 % R.H.
Mixing Ratio             5 part of part A to be mixed thoroughly with 1 part of part B
Pot life                       3 hours @ 25 deg C
Thinner/Cleaner      Thinner 4K No. 65

SURFACE PREPARATION :

Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue with cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :
I. Superguard HB                                II. Superguard FX
Supergrafd 2K Colour                       Supergrafd 2K Colour

STORAGE AND HANDLING :
Storage   The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling              Handle with care. Stir well be for use.
Packing                3.154 ltrs – Part A , 0.631 ltrs – Part B

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.