SUPERGUARD 2K COLOUR

SUPERGUARD 2K COLOUR

SUPERGUARD 2K COLOUR

TECHNICAL DATA:

PRODUCT DESCRIPTION :

Superguard 2k colour is a two-component, high build epoxy coating with high resistance to a wide range of chemical and solvent. The formulated with inert fillers and pigments which provide good durability and protection in the marine and aggressive environment,a wide range of topcoat where improved gloss and colour retention.
RECOMMENDED USE :

Use as an intermediate or topcoat over zinc-rich or primer for the protection structural steel, tank exterior, chemical plants, concrete floor, platforms, refineries etc.
PHYSICAL DATA :
Colour        According to colour card
Volume Solid (%)        60 + 2

Specific gravity        1.30-1.35
Gloss        Glossy
Surface        Steel and Concrete
Flashpoint (TCC ASTM D56)        20 + 2 deg C

Flim thickness per coat        wet 150-200 microns
Theoretical coverage           18 sq. m / U.S. gal. at 200 microns
Drying time             @ 25 deg C
Dry to recoat           3-4 hours
Dry to touch            1-2 hours
Cured to hard          2-7 days
-Recommended film thickness
-Good ventilation
-Dependent on temperature and humidity n

 

SKU: 12 Category:

Description

APPLICATION DATA :
Application method             Brush, Roller and Airless spray
Mixing ratio                          5 part of part A to be mixed thoroughly with 1 part of part B
Pot life                                   3 hours @ 25 deg C
Thinner/Cleaner                  Thinner 4K No. 8 or 65

SURFACE PREPARATION :

Steel surface – abrasive blast clean surface to comply with Swedish Standard Sa. 2.0 ” Commercial Blast” before applying over primer and when cured completely, remove any oil and grease residue by cleaner

Concrete surface – the surface must be allowed cured for 28 days and remove contaminate, oil and grease must be clean

RECOMMENDED SYSTEM :
I.Superguard sealer                               II. Superguard HB
Superguard 2k colour                           Superguard 2k colour

STORAGE AND HANDLING :
Storage    The product must be store in a well-ventilated place protected from high
temperature. The container must be kept tightly closed.
Handling              Handle with care. Stir well be for use.
Packing                3.154 L . Part A , 0.631 L . Part B

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.

Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.

Eyes should be flushed with water and medical attention sought immediately.