UNIQUE FLEX TOP COAT

UNIQUE FLEX TOP COAT

UNIQUE FLEX TOPCOAT
TECHNICAL DATA:
PRODUCT DESCRIPTION :
Unique Flex Topcoat is an acrylic based single pack elastomeric wall coating which can be applied by spray or roller. It is
based on high-quality elastomeric polymer blended with specially selected pigments which give it the unique properties
exhibited by this coating.
RECOMMENDED USE :
For use over rendered cement, fiberboard, concrete, and masonry surfaces where a highly durable elastomeric and
anti-carbonation coating is required. Can be applied by spray, brush, or roller. Suitable for most exterior building surfaces,
but specifically designed for use over masonry surfaces which are prone to surface cracking with time. Unique Flex has
excellent which allows the coating to expand and stretch when cracks occur in the substrate, maintaining an intact film.
The anti-carbonation properties and the high film elongation properties help to eliminate the formation of ” concrete
cancer “

SKU: 37 Category:

Description

FEATURES :
– High quality elastomeric acrylic resins blended with specially selected pigments.
– Capable of expanding with the substrate in hot weather and contracting when the temperature falls.
– Elongation of the coating is up to 500 % @ 25 °C.
– Tensile Strength 0.3 Kgf/mm2
– Excellent adhesion to most substrates.
– CO2 diffusion resistance coefficient (µ value) – 4.0 EO5
– Wind-driven rain resistance,- – pass
– Dirt pick up resistance,- – excellent
– Unique Flex has been formulated to provide excellent resistance to mold and fungus infestation.
GENERAL DATA :
Colour               White and other colors on request.
Finish                Sheen/Low Sheen
Shelf Life           Up to 12 months when stored in a tightly sealed container below 35°C
APPLICATION DATA :
Recommended             35 – 40 microns
Coverage                     120 m² / drum
No. of Coat                   1 or 2
Apply by                      Brush, Roller, and Spray
Drying Time                 2 – 3 hours. Allow overnight drying if recoating with topcoat
Thinner&Cleaner       No thinning required. Clean all equipment with water immediately after use.
Caution     Do not apply Elastomeric coating at a temperature below 10°C. Provide adequate ventilation during use.
SURFACE PREPARATION :
Ensure that the surface is clean and dry. All loose, peeling, and flaking paint must be removed acid etch concrete surfaces (as appropriate).
STORAGE AND HANDLING :
Storage    The product must be store in a well-ventilated place protected from high
temperatures. The container must be kept tightly closed.
Handling              Handle with care. Stir well be for use.
Packing                1 US gal. , 5 US gal.
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.