SUPERGUARD COAL TAR

SUPERGUARD COAL TAR

SUPERGUARD COAL TAR
TECHNICAL DATA:
PRODUCT DESCRIPTION :
Superguard coal tar is an epoxy two-component, rust preventing water-resistant and to a wide range of chemical
and solvent resisting .which provide good durability and protection in the marine and underwater area, etc.
RECOMMENDED USE :
Superguard coal tar epoxy is used on steel structures, wood, concrete,
underwater area, etc.
PHYSICAL DATA :
Colour:           Black
Volume Solid (%)        75 ± 2 ( ASTM D2697 Modified )
Specific gravity          1.50±0.05
Surface          Steel, Wood, and Concrete
Flashpoint Base :          25 + 2 deg C
Hardener :          25 + 2 deg C
Flim thickness per coat          100 – 150 microns [ D.F.T ]
Theoretical coverage          7.50-5.00 sq. m /liter
Drying time      @ 25 deg C
Dry to touch       3-4 hours
Dry to recoat     12 hours – 7 days

SKU: 16 Category:

Description

APPLICATION DATA :
Application method        Brush, Roller, and Airless spray
Temperature        Minimum 10 °C
Humidity        Maximum 85 % R.H.
Mixing ratio      4 part of part A to be mixed thoroughly with 1 part of part B ( 4: 1) by volume.
Thinning        5-10 % by volume
Pot life           3 hours @ 25 deg C ( Reduced at a higher temperature )
Thinning           Thinner 4K No.65 5-10 % by volume
Cleaner            Thinner 4K No.65
SURFACE PREPARATION :
Steel surface – abrasive blast clean surface to comply with Swedish Standard
Sa. 2.0 ” Commercial Blast” or better before applying over primer and when cured
completely, remove any oil and grease residue by cleaner
Concrete surface – the surface must be allowed cured for 28 days and remove
contaminate, oil and grease must be clean
RECOMMENDED SYSTEM
Superguard coal tar 2 coats
STORAGE AND HANDLING :
Storage      The product must be store in a well-ventilated place protected from high
Handling        Handle with care. Stir well before use.
Packing        Two-pack product per set; 1 U.S.Gallon, 5 U.S. Gallon.
HEALTH AND SAFETY :
Avoid contact with skin and eyes wear. Wear suitable protective clothing such as overalls during painting.
Avoid skin contact. Spillage on the skin should immediately be removed with soap and water.
Eyes should be flushed with water and medical attention sought immediately.