NEOGLOSS ENAMEL

NEOGLOSS ENAMEL

NEOGLOSS ENAMEL
PRODUCT DESCRIPTION :
A high quality long oil alkyd gloss enamel with excellent resistant to weathering
and mildew growth. It has very good gloss retention and light fastness.
RECOMMENDED USE :
It is most suitable for decoration and protection of both interior and exterior
of all wooden, metal and masonry surface such as steel or concrete (with proper priming)
PHYSICAL DATA :
Colour According to colour card
Volume Solid (%) 60 ± 2 ( ASTM D2697 Modified )
Specific gravity 1.09±0.05
Gloss High gloss
Surface Ferrous surface
Flash point 27 deg C
Flim thickness recommended 40-60 microns [D.F.T. ]
Theoretical coverage 15.00-10.00 sq.m / Litre.
Drying time @ 25 deg C
Dry to touch 60 mins.
Curing time 48-72 hrs
APPLICATION DATA :
Application method Brush, Roller, or Spray
Temperature Minimum 10°C
Humidity Maximum 85 % R.H.
Thinning Thinner 4K No. 15/ Turpentine 5-10 % by volume
Cleaner Thinner 4K No.15 / Turpentine
SURFACE PREPARATION :
All surface must be dry and clean, free from rust millscale, dirt and oil that may cause the film defects.
RECOMMENDED SYSTEM :
Metal Surface 1 coat of Neocoat Primer 2 coats of Neogloss High Gloss Enamel
Masonry Surface Primes with 1 coat of Neocoat masonry sealer 2 coat of Neogloss High Gloss Enamel
STORAGE AND HANDLING :
Storage The product must be store in well ventilated place protected from
high temperature. Container must be kept tightly closed .
Handling Handle with care . Stir well before use .
Packing 1 U.S. gallon , 5 U.S. gallon HEALTH AND SAFETY :
Avoid contact with skin and eyes wear . Wear suitable protective clothing such as overalls during painting.
Avoid skin contact . Spillage on skin should immediately be remove with soap and water.
Eyes should be flushed with water and medical attention sought immediately.

SKU: 8 Category: